Motorola Symbol CS3000 Series Product Reference Manual page 34

1 - 20 Symbol CS3000 Series Scanner Product Reference Guide
NOTE Bluetooth pairing suspends temporarily while charging via a USB cable. Disconnecting the cable
automatically re-establishes the Bluetooth pairing.
Unpairing
To temporarily unpair the scanner and host, press the Bluetooth button. This disables Bluetooth and the Bluetooth
button stops blinking. Pressing the Bluetooth button again re-pairs the scanner with the host.
To permanently unpair the scanner and host, scan
different host device.
NOTE To enter batch scanning mode, the scanner cannot be paired to a Bluetooth host (applies to CS3070
model only).
Deleting the CS3070 from the Device List
To delete the device from the discovered devices list, tap and old the device and select
Deleting Device
Figure 1-30
Unpair on page 3-13. This allows the scanner to pair to a
.
Delete