Repair Procedures; Initial Disassembly; Figure 3 Separating Front And Rear Housings - Motorola HSN4035 Service Instructions Manual

Repair Procedures

Initial Disassembly

Housing
1. Refer to Figure 3. Push tips of two identical or similar small flat
blade screwdrivers into opening between front and rear housings.
2. Push both screwdriver blades simultaneously away from speaker to
pop up and release front housing from rear housing.
!
C a u t i o n
3. Pull front housing off of rear housing carefully, which will expose
speaker cone.
4. Grasp speaker at its edges and lift it up and out of rear housing.
Leave wires (black Zipcord) connected to PCB and set speaker face
down next to right side of rear housing.
Dimple
Rear
Gasket

Figure 3 Separating Front and Rear Housings

When performing step 3, be very careful to
avoid damaging loudspeaker cone, which faces
upward directly below front cover.
Front
Housing
MAEPF-26667-O
5