Fcc Compliance - Universal Laser Systems Laser Platform M-300 Installation And Operation Manual

1-6 Safety

FCC Compliance

This ULS laser system has been tested and found to comply with Federal Communication
Commission (FCC) directives regarding Electromagnetic Compatibility (EMC). In accordance
with these directives ULS is required to provide the following information to its customers.
This device Complied with FCC Rules Part 15. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device
as set forth in Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with manufacturer's instructions, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his or her own expense.
Users should be aware that changes or modifications to this equipment not expressly approved
by the manufacturer could void the user's authority to operate the equipment.
This equipment has been type tested and found to comply with the limits for a Computing Device
per FCC part 15, using shielded cables. Shielded cables must be used in order to insure
compliance with FCC regulations.
FCC Compliance Statement and Warnings