Kettler ST 2600-9 Kadett Training And Operating Instructions page 2

Computer and training instructions
GB
Operating instructions for the training computer with digital display (ST2600-9)
Equipment
Symbols:
1. P no training: ready to accept set values
2. SCAN automatic change of display
3. ODOMETER display of total kilometres covered
15. KM
4. FREQUENCY display of stroke frequency
5. TIME display of training time
6. COUNTS display of stroke number
7. KILOJOULE display of energy consumption
8. PULSE display of current pulse
12. Mark acoustic stroke frequency preset is ac-
tive
17. Heart will flash in accordance with pulse
Values:
9. Large display room temperature [0 - 40 °]
odometer [0 - 9999 km]
fitness value [F1.0 - F6.0]
10. Stroke frequency 0 - 99 [strokes/min.]
13. Time 0:00 - 99:59 [min:sec]
14. Rowing strokes 0.0 - 9999 [km]
16. Energy consumption 0 - 9999 [KJ]
16 Pulse 50 - 199 [beats/min]
Buttons:
Minus button reduce values (Count down display
range)
function button [Set value, change, re-
Set button
set of display]
Plus button increase values (display range back-
ward)
Recovery button function button [Fitness value determi-
nation]
Connections (at front)
Socket for the ear-clip
Connections (at rear)
Socket (2 poles) for the speed pickup
Battery compartment 2 batteries: Mignon1.5 Volt, LR6, AA,
1.0 Displays before starting the training
1. Room temperature
2. Complete display
3. Total kilometres coveredfig. 3 [display term:10 seconds or
4. Set value mode
Fig. 1 Room temperature
fig. 1 [prior to and after training]
fig. 2 [after start of rowing or pres-
sing a button, 1 sec]
button]
fig. 4 [with set button]
Fig. 2 Complete display
7