Function Settings - Kenwood KDC-208U Instruction Manual

Function settings
1 Press the volume knob to enter [FUNCTION] mode.
2 Turn the volume knob to select [AUDIO CTRL] or [SETTINGS], then press to enter.
3 Turn the volume knob to make a selection, then press to confirm.
• See table below for selection.
• Repeat step 3 until the desired item is selected/activated.
• Press ~ to return to the previous item.
4 Hold ~ to finish the procedure.
[AUDIO CTRL] : While listening to any source except in STANDBY state...
~~=.,.,...."".-=-',."".,."=~".....,..",.,....,...,,.~==..,.........,,=
~~?~fitj':'"
"
":eli~t(~~:~<'$ !~g;~{~4i~~~:l~~~s;~~~~~tt~"':d-~~t~~~ii;i~;;¥j~,
SUB-W LEVEL -15 - + 15 (Preset: 0): Adjusts the subwoofer
out~u.t_l_ev_el_.
_
BASS BOOST B.BOOST LV1 */ B,BOOSI
LV2~!~!~x~pre!erred
bass boost leveL! OFF:
Canc~_.
__. _
SYSTEM Q
~ATURAL
*/ USER/ ROCK/ POPS/ EASY
I
TOP40/
JAZZI
GAME: Selects apreset sound mode suitable to the
music genre. (Selects [USER] to use the customized bass, middle, and treble settings.)
BASS LEVEL -8 - +8 (Preset: 0): Source tone memory: Adjusts the level to memorize in each source. (Before making an
MID LEVEL adjustment, select the source you want to adjust.)
- - - - - -
TRE LEVEL
BALANCE
FADER
SUB-W SET
DETAIL SET
L15 - R15 (Preset: 0): Adjusts the left and right speaker output balance.
R15 - F15 (Preset: 0): Adjusts the rear and front speaker output balance.
ON*: Turns on the subwoofer output. ; OFF: Cancels.
I
LPF SUB-W: THROUGH*: All signals are sent to the subwoofer. ;85HZ/120HZ/160HZ: Frequencies
!
higherthan 85 Hz/120 Hz/160 Hz are cut off,
I
I
SUB-W PHASE: REV (180°)/ NORM
(00)
*: Selects the phase angle of the subwoofer output to be in line
with the speaker output for optimum performance. (Selectable only if asetting other than
[THROUGH] is selected for [LPF 5UB-W].)
SUPREME SET: ON*: Creates realistic sound by interpolating the high-frequency components that are lost in
MP3/WMA audio compression. ; OFF: Cancels. (Selectable only when playback an MP3/WMA
disc or aUSB device, except iPod.)
-8 - +8 (for AUX) ; -8 - 0 (for other sources): Presets the volume adjustment level of
each source. The volume level will automatically increase or decrease when you change the
source. (Before making an adjustment,
sele~~the sourc~Jou ~ant t~
adjus.t.)
I
VOL OFFSET:
(Preset: 0)
______L
• [SUB-W LEVEll SUB-W SETI LPF SUB-WI SUB-W PHASE] is selectable only if [SWITCH PRE] is set to [SUB-W]. (page
7)
• [5UB-W LEVEll LPF SUB-W/ SUB-W PHASE] is selectable only if [SUB-W SET] is set to [ON].
[SETTINGS]
AUX NAME
CLOCK
DISPLAY
AUX*
I DVDI
PORTABLEI
GAMEl
VIDEOI TV: Selects the desired name for the connected component.
(Selectable only if"AUX" is selected as the source.)
CLOCK ADJ: (For details, see page
6.)
DIMMER SET: ON: Dims the display illumination. ; OFF*: Cancels.
TEXT SCROLL: AUTO*
I
ONCE: Selects to scroll the display information automatically, or scroll only once. ;
OFF: Cancels.
13