Listening To The Other External Components - Kenwood KDC-208U Instruction Manual

Listening to the other external
components
Preparation: Make sure [ON1] or [ON2] is selected for [BUilTIN AUX). (page 6)
3.5 mm (3/16") stereo mini plug
(optional accessory)
Auxiliary input jack
-
~:=:::::>"'"'
-',
~~~~~~~~~~~~~~~~~~~~~~~~~lE~~~
. . . . .
·
· · ·
·
·
·
·
·
· . . .
. .
.
.
.
Portable audio device
(optional accessory)
1 Press <!> SRC to select
II
AUX."
2 Turn on the external component and
start playing.
3 Turn the volume knob to adjust the
volume.
- - - - - · · - · · - 1
I
!
I
I
i
I
r-------'------.~---
Handling discs
- Do not touch the recording surface of the disc.
- Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
- Do not use any accessories for the disc.
I -
Clean from the center of the disc and move outward.
I
-
Clean the disc with a dry silicon or soft cloth. Do not use any solvents.
I -
When removing discs from this unit, pull them out horizontally.
I-
Remove the rims from the center hole and disc edge before inserting a disc.
Maintenance
Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to
observe this precaution may result in damage to the monitor or unit.
I
Cleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a
cotton swab or cloth.
12