Related Manuals for Kenwood KDC-2016
Summary of Contents for Kenwood KDC-2016
- Page 1 CD-RECEIVER KDC-4016 INSTRUCTION MANUAL KDC-2016 COMPACT DIGITAL AUDIO © B64-1548-00 (MW)
-
Page 2: Table Of Contents
Contents Before use Basic Operations of remote ........15 Safety precautions ................3 Installation Handling Compact discs..............5 Accessories.................17 General features Installation Procedure..............17 Power....................6 Connecting Wires to Terminals...........18 Switching Modes ................6 Installation ...................19 Volume ..................7 Troubleshooting Guide ........22 Attenuator ..................7 Loudness ..................7 Specifications .............25 Audio Control Setting ..............7 ec4/dB (Sound Coordinate) ............8 Clock display .................8... -
Page 3: Safety Precautions
CD changers consult your Kenwood dealer. Cannot be used with this model. • To prevent deterioration, do not touch the • Make sure not to get your fingers caught terminals of the unit or faceplate with your between the faceplate and the unit. - Page 4 Cleaning the Unit try pressing the reset button first. If that does If the front panel gets dirty, turn off the not solve the problem, consult your Kenwood power and wipe the panel with a dry silicon dealer. cloth or soft cloth.
-
Page 5: Handling Compact Discs
Handling Compact discs Playing a CD that is dirty, scratched Cleaning CDs Do Not Load CD Accessories or warped can cause the sound to If a CD has gotten dirty, wipe it off gently Do not use commercially available CD skip and the unit to operate using a commercially available cleaning cloth accessories that can be loaded into the CD... -
Page 6: General Features
General features Power SRC/ Turning on the power: PWR OFF Press the SRC (source) button. ¢ NOTE Turn the power on before carrying out the following procedures. Turning off the power: CRSC Press the PWR OFF button for at least one second. DISC A.ADJ LOUD... -
Page 7: Volume
switching adapter (KCA-S210A or CA-C1AX) or CD changer Press the LOUD button for at least one second to switch the (KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is loudness on and off. connected to this unit. During the AUX mode, "AVin" will show in the display. When the CA-C1AX is being used, the AUX Mode will replace the External Disc Control Mode. -
Page 8: Ec4/Db (Sound Coordinate)
General features Clock display "TRE": Adjust the treble level. Setting values: - 8 - + 8 Turning clock display On/Off: Each time you press the CLK button, the display switches between the clock and each mode display. "BL": Adjust the balance level. Setting values: Left 15 - Right 15 Adjusting Time Adjust the time. - Page 9 Tuner features Removing the Faceplate: Press the release button. The faceplate is unlocked, allowing you to detach it. CRSC NOTE ¢ • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached.
-
Page 10: Tuner Features Tuning
Tuner features Recalling a Preset Station: Tuning Press the preset station button (#1-6) for the desired station. You can choose between auto seek tuning of receivable The number of the recalled station is displayed. frequencies and manual tuning. NOTE Press the SRC (source) button repeatedly to select the tuner You can store six stations in each of the FM1, FM2, FM3, and AM mode. -
Page 11: Clean Reception System Circuit (Crsc)
CD/External disc control features NOTE When you change the frequency step settings, all memory contents will be erased. DISC + ¢ Returning Frequency Step Settings to Original Values: Repeat steps 1 and 2 above. CRSC DISC A.ADJ Clean Reception System Circuit (CRSC) DISC LOUD Temporarily have reception switched from stereo to mono to... -
Page 12: Cd/External Disc Control Features Playing Cds
CD/External disc control features that is connected. Playing CDs Mode Display Examples • "CD2"...when a CD player is connected Playing CDs: • "DISC"...when a disc changer is connected If no CDs are inserted, insert one in the slot with the label •... -
Page 13: Disc Search
Press the 4 button to display the desired track number. Track / Disc Repeat Press once to search back to the beginning of the current track, Repeat playing the track or the disc currently being listened to. twice to search back to the beginning of the previous track, and so forth. -
Page 14: Disc Scan
CD/External disc control features Function of the KDC-4016 NOTE Disc Scan Function of disc changers) Random play is canceled when you eject the disc. Successively play the beginning of each disc on a changer until you find the one that you want to listen to. Starting the disc scan: Press the D.SCN button. -
Page 15: Basic Operations Of Remote
Basic Operations of remote Function of the KDC-4016 NOTE The supplied remote control unit is in its storage case. 2CAUTION Do not set the remote on hot places such as above the dashboard. Loading and Replacing the Batteries: Use two “AAA”-size batteries. –... - Page 16 Basic Operations of remote Function of the KDC-4016 Basic operations Tuner features • 4/¢ (TUNE) buttons • VOLUME buttons Press the 4 button to decrease the frequency. Press the button to turn the volume up. – Press the ¢ button to increase the frequency. Press the button to turn the volume down.
-
Page 17: Accessories
Accessories Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and External view Number of items disconnect the - battery. 2. Make the proper input and output wire connections for each unit...........1 3. Connect the speaker wires of the wiring harness. 4. -
Page 18: Connecting Wires To Terminals
Connecting Wires to Terminals FM/AM antenna input Rear left output (White) Front left output (White) Fuse (10A) (KDC-4016 only) KENWOOD disc changer control input (KDC-4016 only) Front right output (Red) NOTE (KDC-4016 only) To connect the Disc changer, consult your Disc changer manual. -
Page 19: Installation
Installation ■ ■ Installation Installing in Japanese-Made Cars Refer to the section “Removing the hard rubber frame (P. 20)” Firewall or metal support and then remove the hard rubber frame. Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the Accessory4 accessory screws. - Page 20 Installation ■ ■ Removing the hard rubber frame Removing the Unit Refer to the section “Removing the hard rubber frame (P. 20)” Engage the catch pins on the removal tool and remove the two and then remove the hard rubber frame. locks on the lower level.
- Page 21 ■ Screwing the Faceplate on the Unit If you want to fasten the faceplate to the main unit so that it does not fall off, screw in the provided screw (ø4 × 16 mm) in the hole shown below. Accessory7 2CAUTION Never insert the taptite screw (ø4 ×...
-
Page 22: Troubleshooting Guide
Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. PROBLEM POSSIBLE CAUSE SOLUTION The power does not turn on. The fuse has blown. - Page 23 External disc control mode (KDC-4016 only) PROBLEM POSSIBLE CAUSE SOLUTION The disc control mode cannot No wire has been connected to the disc changer input Connect the wire to the disc changer input terminal on be selected. terminal on the unit. the unit.
- Page 24 Troubleshooting Guide The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. E-01 ] Load the disc magazine properly. No CD in the unit.
-
Page 25: Specifications
Specifications Specifications subject to change without notice. FM tuner section Audio section Maximum output power ..........45 W × 4 Frequency range (200 kHz space) .....87.9 MHz – 107.9 MHz Full bandwidth power (at less than 1% THD)....22 W × 4 (50 kHz space) ....87.5 MHz –...