Kenwood KNA-G510 Instruction Manual page 45

Custom POls (Points of Interest)
You can manually load custom points of interest (POI)
databases, available from various companies on the
Internet. Some custom POI databases contain alert
information for points such as safety cameras and school
zones. The navigation system can notify you when you
approach one of these points.
;~l~~~j~h'
CAUTION: Garmin is not responsible for the
'tY
consequences ofusing a custom POI database or
the accuracy ofthe safety camera or other custom
POI database.
After downloading your POI database, use the Garmin
POI Loader to install the POIs onto an SD card. Then,
you can use the SD card to load the POls into the KNA-
G510. The POI Loader is available at http://www
.garmin.com/products/poiloader. Refer to the POI Loader
Help file for more information; press F1to open the Help
file.
KNA-G510 Instruction Manual
ApPENDIX
When you insert the SD card into the KNA-G510, a
message appears on the screen, prompting you to save
the custom POls to your navigation system. Select Yes.
!fyou select No, custom POls will not work.
• NOTE: Each time you load custom POls to the
navigation system, any other custom POls already
saved in the system will be overwritten.
Finding Custom POls
To view a list of the custom POls loaded in your
navigation system, touch Where To? > My Locations>
Custom POls.
EN-39