Saving The Active Route; Navigating A Saved Route; Recalculating The Route; Deleting All Saved Routes - Kenwood KNA-G510 Instruction Manual

Saving the Active Route
From the Menu page, touch Tools> My Data>
Routes> Save Active Route.
Navigating a Saved Route
From the Menu page, touch Tools> My Data>
Routes> Navigate Saved Route. Touch the route
you want to navigate.
Recalculating the Route
From the Menu page, touch Tools> My Data>
Routes> Recalculate Route.
Deleting All Saved Routes
From the Menu page, touch Tools> My Data>
Routes>
-=-
> Delete All Saved Routes.
Stopping Your Route
From the Menu page, touch Stop. Then touch Yes.
KNA-G510
In~'rn!,e>ur"'.1 Illi:::Jnii~ll
CREATIi'JG AND EDITING ROUTES
Adding a Detour to a Route
If you need to take a detour from your current route,
open the Menu page and touch Detour.
1/2 mile, 2 miles, or 5 miles-select the distance of
the detour. For example if a road sign indicates that the
street is closed for the next 2 miles, touch 2 miles in the
list. The navigation system recalculates your route for
the next 2 miles.
Detour
by
Road(s) In Route-select roads in your route
to avoid. For example, if the highway ramp is closed,
select the ramp in the list of roads. The navigation
system recalculates your route to avoid that ramp.
Detour
by
Traffic Event on Route-if you are using an
FM Traffic Receiver or XM NavTraffic, you can detour
around traffic events.
Remove All Detours-touch to remove any detours you
have entered for the route.
EN-1?