D-Link DCM-200 Quick Install Manual page 3

Connecting The Cable Modem Continued...
The final cable modem setup will look like the figures below:
Ethernet Cable Connection
*Note: When using the USB Cable Connection, make sure the Status light
located at the front of the modem is "ON" (not blinking) before connecting
the USB cable (type A end) to your computer. DO NOT CONNECT THE
USB CABLE TO YOUR COMPUTER IF THE STATUS LED DOES
NOT SHOW A SOLID LIGHT.
If the STATUS LED continues to blink, please contact your cable provider to
ensure that your cable modem is provisioned* on their network.
* Your cable modem provider will need the model number, serial number
and MAC (Media Access Control) Address of your modem in order to
"provision" your modem on the network.
If you are using the Ethernet cable to make your connection, you have now
completed the installation. Enjoy your new cable modem!
For those using the USB cable connection, please continue with the
installation of the USB drivers, step 4.
Windows XP
Windows 2000
Windows ME
Windows 98/98SE
USB Cable Connection
OR
USB Driver Installation
Page 5
Page 7
Page 11
Page 12
3