Paper Guidelines; Installing A Printer Driver - Canon MultiPASS C3000 User Manual

Paper Guidelines

When selecting or loading paper, please remember the following:
Attempting to print on damp, curled, wrinkled, or torn paper can
cause paper jams and poor print quality.
Use cut-sheet paper only. You cannot use multipart paper.
When using graph paper, the lines may not match because the
1/6-inch line spacing of the printer is slightly less than that of
graph paper.
If the print density of your page is very high, light paper stock may
curl slightly due to the large amount of ink. If you need to print
dense graphics, try printing on heavier stock.
Do not use thicker paper than meets the specifications for this
printer. Printing with a paper that is thick enough to come in
contact with the print head nozzles may damage the BJ cartridge.

Installing a Printer Driver

Before you can use any type of printer with your computer, you must
install a printer driver. The printer driver tells the computer what kind
of a printer you are using. The printer driver also controls the various
settings, such as print quality and paper type. You define these settings
within the printer driver, and the printer driver then communicates the
settings to both the computer and the printer.
You must install the MultiPASS Printer Driver for Windows and the
MultiPASS Desktop Manager before you can use the MultiPASS C3000
as a printer for your computer. See your Setup Guide for details on how
to install this software.
2-4 Printing With the MultiPASS C3000 Chapter 2