Canon MultiPASS C3000 User Manual page 125

2
Press
START/COPY.
3
Change the
resolution if
necessary.
4
Select
Reduction mode
if necessary.
6-2 Copying and Scanning With the MultiPASS C3000
START/COPY
The display shows the size of the copy (the default is
100%) and the number of copies (the default is 1).
If you want to change the copying resolution, press the
button.
RESOLUTION
RESOLUTION
You can make copies in
( does not appear as one of the available
STANDARD
resolutions.)
resolution works well for copying most text
FINE
documents.
Use resolution when copying documents that
PHOTO
contain photographs. This scans areas of the document
that contain photos with 64 levels of gray. This results in
a much better reproduction of the photograph.
To reduce the size of the copies, use the < and > buttons
to select the reduction percentage you want (70%, 80%,
90%, or 100%):
1 2
COPY 100% 01
FINE
PHOTO
or resolution.
FINE PHOTO
COPY 80%
Chapter 6