Muting - Polycom EFIR11 Instruction Manual

5.) M
UTING
Using the mute buttons will mute the Output of the Vortex. By default, it does not
mute the input, although it can be programmed to mute inputs and outputs via a
Macro.
M O
UTE N
This button prohibits the local audio from being sent to the far side. It does not
prohibit the remote audio from being heard in the local room. When this button is
pushed, a descending doorbell-like tone will be sent to the local room loudspeakers to
give audible indication that the audio has been muted. The Mute On button is
associated with Macro 52. See the Examples section for more information on
customizing the Mute On button.
M O
UTE FF
This button permits the local audio to send audio to the far side. When this button is
pushed, an ascending doorbell-like tone will be sent to the local room loudspeakers to
give audible indication that the audio has been unmuted. the Mute Off button is
associated with Macro 55. See the Examples section for more information on
customizing the Mute Off button.
10