Panasonic ToughBook CF-P2 Series Operating Instructions Manual page 64

Dealing with Problems
Connecting Peripherals
Peripheral is not recog-
nized even after driver is
installed.
Network
Cannot connect to the net-
work.
Sounds
Quality of recorded sound
is poor.
Noise in recording or play-
back sound.
A music file cannot play
back.
Program Buttons
The program assigned to
the button does not start.
Phone
Phone function is dis-
abled automatically.
The phone ringer stops.
Bluetooth
When connection or
communication with
Bluetooth is not smooth.
64
Remove cards or other peripherals, and push the reset
switch.
Check the server information and network settings.
Tap - [Settings] - [Personal] tab - [Input] - [Options] tab
- [Voice recording format], and select a higher frequency.
If a load is applied during recording or playback, for
example when the SD Memory Card is disconnected or
connected, then noise in the recording or playback will
result. In this event, stop the recording or playback, and
restart after closing other applications.
Some music files may not be able to play back.
When the program display of a start menu is changed
after assigning a program, if you press a button, that pro-
gram may not start. In that case, tap
[Personal] tab - [Buttons] - [Program Buttons] tab, and
re-assign the program.
When the remaining power in the battery discharges, the
Phone function may turn off suddenly. (In this case,
"Phone function is disabled. Please re-charge the bat-
tery." is displayed.)
If the Volume Up/Down Button is pressed while the
phone is ringing, the phone ringer will stop.
Turn the Bluetooth function off and then turn it on again.
If this function still does not work properly, reset the
CF-P2 and turn the Bluetooth on.
- [Settings] -