Wireless Functions
Establishing the Bluetooth Connection by Opening the COM Port
Use this setting when using Bluetooth intermittently (i.e. Printer application).
(1) Make sure that Bluetooth is powered on.
(2) Tap, in order,
Bluetooth].
(3) Tap
(Refresh Button) on the command bar to search
for devices within range.
(4) Tap the target device from a device list.
(5) Tap
(This icon indicates a serial port) from a ser-
vice list to connect the target device via the serial port.
NOTE
If
(ActiveSync
Serial Port], tap and hold [Bluetooth Serial Port]
and then tap [Do not use to Connect to ActiveSync]
to display
(6) This message at right will be displayed.
Tap [ok] and tap
nect the Bluetooth connection.
(7) Start an appropriate software. (i.e. printer application)
(8) Set the COM port to COM9 (default).
(9) Open the COM port using the software.
The Bluetooth connection with the target device will
be automatically established.
NOTE
CF-P2 can be connected to the device from next time with-
out the need to set steps (1) to (6) again.
- [Programs] - [Panasonic
icon) is displayed at [Bluetooth
®
.
on the command bar to discon-
51