Operation - Panasonic ToughBook CF-P2 Series Operating Instructions Manual

First-time Operation
5
Turn your computer on
(1) Using the provided stylus (
reset switch straight in for 1 second while holding down on the
power switch (
CAUTION
When the battery pack is not fully charged, if the Fast Travel
Charger is connected, CF-P2 may not turn on.
Use only the provided stylus to push the reset switch.
Do not push the reset switch with any other sharp-pointed
objects, i.e. pencils, and ball point pens. The reset switch
or other parts may become damaged.
(2) Tap the screen to set up your Pocket PC.
The Windows*
This computer uses Microsoft
1
*
for Pocket PC, Premium with Phone Edition.
(3) Align the touchscreen.
(For alignment, tapping operations are required. For informa-
tion on tapping, refer to page 17.)
"+" is displayed in the center, upper left, lower left, lower right,
and upper right portions of the touch screen, in that order. Each
time the "+" mark is displayed, tap the center of the "+" mark
with the stylus.
NOTE
In this operation, the "+" mark may not move smoothly. This
is not a malfunction. Continue the operation.
(4) At [complete], tap the screen to begin using CF-P2.
6
Set the time and date
(1) Tap - [Settings] - [System] tab - [Clock & Alarms].
(2) Set the time zone, time and date.
(3) Tap [ok].
NOTE
You can also set the date and time by tapping
This concludes the first-time use operation guidelines.
page 17), push the center of the
page 12).
alignment screen is displayed.
1
Windows Mobile
®
Reset Switch
2003 Second Edition Software
TM
on [Today] screen ( page 15).
11