3Com 3CWE820A Quick Start Manual page 9

Ethernet client bridge, wireless network solution

7 Set the ESSID to match the ESSID of your access point.

8 Enter a station (client) name to identify the Ethernet client that

your ECB is bridging to.

9 Click Update and Reset Unit at the bottom of the screen.

10 Verify that the ECB is associated with your access point by

checking that the Wireless LED on the ECB is green. The ECB is

now bridging to your wireless network.

11 Connect the ECB to the Ethernet device (such as a printer) you

intend to connect to your wireless network.

12 Turn the ECB power off, and then back on. Your Ethernet device is

now wireless!

Ethernet Client Bridge

Table of Contents