Remote Audio Controls; Video Entertainment System (Ves) - Dodge RAM 2010 User Manual

ELECTRONICS

REMOTE AUDIO CONTROLS

VIDEO ENTERTAINMENT SYSTEM (VES)™

• To use the headphones, press the power button located on the right ear cup. Select
the channel on the headphones (1 or 2) that corresponds to the channel selected on
the VES™ screen.
Operation Of The Touch-Screen Radio
• To view a DVD video press the OPEN/CLOSE hard-key and insert the disc. Playback will
begin automatically after the DVD is recognized by the disc drive. If playback does not
begin automatically follow these steps:
• Press the MENU hard-key, then touch the REAR VES™ soft-key. If a chapter list
appears on the right side of the screen touch the HIDE LIST soft-key to display the
Rear VES™ Control screen.
• Touch the 1 soft-key to select an audio channel, then touch the DISC soft-key in the
MEDIA column.
• The remote audio controls are located on
the rear surface of the steering wheel.
Right Switch
• Press the switch up or down to increase or
decrease the volume.
• Press the button in the center to change
modes AM/FM/CD/SAT.
Left Switch
• Press the switch up or down to search for
the next listenable station or select the next
or previous CD track.
• Press the button in the center to select the
next preset station (radio) or to change CDs
if equipped with a CD Changer.
System Operation
• The screen is located on the headliner
behind the front seat. To lower the screen,
press the release button located in the
center of the console rear of the screen.
• The system may be controlled by the front
seat occupants using the touch-screen
radio, or by the rear seat occupants using
the remote control.
• The video screen displays information in a
split screen format. The left side of the
screen is referred to as Channel 1 and the
right side of the screen is referred to as
Channel 2. All modes except video modes
are displayed in a split screen format.
34