SOYO SY-K7VMP2 Quick Start Manual page 16

SY-K7VMP2 Quick Start Guide
Pin1 Pin2
Power Data(-) Data(+)
CPU Cooling Fan: CPUFAN1
Pin1 Pin2
GND 12V
Chassis Fan: CHAFAN1
Pin1 Pin2
CONTROL 12V
CD -IN: CDIN1 / AUXIN1
Connect the CD Line-in cord from the CD-ROM
device to the matching connector CDIN
Power LED
Reset
PWRBT
HDD LED
Pin1 Pin2
LED Anode LED Cathode
Connect your power switch to this header (momentary switch type).
To turn off the system, press this switch and hold down for longer than 4 seconds.
Attach the ATX Power cable to this connector. (This motherboard requires an ATX power supply, an AT
power supply can NOT be used.)
Note: We recommend using an AMD approved power supply or at least 350W.
When using the Power-On by PS/2 Keyboard function, please make sure the ATX power supply is able to
provide at least 720mA on the 5V Standby lead (5VSB) in order to meet the standard ATX specifications.
USB20_1
Pin3 Pin4 Pin6
GND Power
Pin3
SENSOR
Pin3
SENSOR
Speaker
Pin1
HDD LED
VCC
PWRBT
Pin1
Power On/Off
ATX Power On/Off: PWRBT
ATX Power Supply: ATX PW
16
Pin7 Pin8
Data(-) Data(+)
CPU Cooling Fan: CPUFAN2
Pin1 Pin2
GND 12V
Chassis Fan: CHAFAN2/3
Pin1 Pin2
GND 12V
Pin1 Pin2
CDIN1 L
AUXIN1 L
Power LED
Pin1 Pin2
VCC NC
Speaker
Pin2 Pin3
NC NC
Pin2 Pin1
GND Control PIN
Pin9 Pin10
GND GND
Pin3
NC
Pin3
NC
Pin3 Pin4
G G R
G G R
Pin3
GND
Pin4
Speaker out
RESET
Pin2
GND