Changing The Audio Channel; 3D Surround; Subtitles; Instant Skip - LG LGDVDR313 Owner's Manual

DVD and Video CD Operation (Continued)
Audio Channel Selection
VCD Video VR +RW
Press AUDIO then press b / B repeatedly during play-
back to hear a different audio channel (STEREO, LEFT
or RIGHT).

3D Surround

DVD Video VR +RW
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a Home Theater System.
1. Press 3D SURR. then press b / B repeatedly during
playback to select "3D SUR.".
2. To turn off the 3D Surround effect, select "NORMAL".

Subtitles

OFF
DVD Video VR +RW
Press SUBTITLE then press b / B repeatedly during
playback to see the different subtitle languages.

Instant Skip

DVD Video VR +RW
Each press INSTANT SKIP skips forward 15 seconds.
ote
If appears, the feature is not available on the disc.

Finding Locations on a Disc

You can directly access any point on a Video CD using
this function. Use this function only while a Video CD is
playing. Playback jumps to the point specified.
1. Press SEARCH during playback.
The progress bar appears on the TV screen.
PBC
TRK 1
2. Use b / B to find a start position for playback.
3. Press ENTER to confirm the selected position.
Playback starts from the selected position.
ote
This function works only when there are no markers
memorized.
STEREO
+R
3D SUR.
+R VCD
+R
+R
VCD
33%
33%

Last Condition Memory

DVD Video VR +RW
This Recorder memorizes the user settings for the last
disc that you have viewed. Settings remain in memory
even if you remove the disc from the Recorder or switch
off the Recorder. If you load a disc that had its settings
memorized, the latest stop position is automatically
recalled.
otes
– Settings are stored in memory for use any time.
– This Recorder does not memorize settings for a disc
if you switch off the Recorder before commencing to
play the disc.

PIP (Picture-in-Picture)

DVD Video VR VCD
This function enables you to view the stored stations in
the sub picture during playback.
Turning PIP On and Off
Press PIP to switch on the sub picture, press PIP
again to switch it off.
Input source selection for sub picture
Press INPUT to select the input source for the sub
picture. Each time INPUT is pressed, each input
source available for the sub picture is displayed as
shown below.
→ →
Tuner AV1 AV2
Program selection for sub picture
Use v / V to change the program if sub picture's
input source is Tuner. The selected program number
is displayed on the TV screen. You can view the
selected program by pressing STOP (x).
Sub picture position change
Press b / B repeatedly until desired position is
achieved. The sub picture moves clockwise or
counterclockwise.
Zoom Sub picture
Press ZOOM repeatedly to enlarge the sub picture,
the magnification level increases up to three steps.
+R
+RW +R
35