Manual Clock Set; Tv Aspect; Display Mode; Progressive Scan - LG LGDVDR313 Owner's Manual

Pre-operation Setup (Continued)

Manual Clock Set

Press SETUP.
1 1
The Setup menu appears.
Use v / V to select the Setup menu.
2 2
While the Setup menu is selected, press B to
3 3
move to the second level.
Use v / V to select the Clock Set option.
4 4
Press B to move to the third level.
5 5
Use v / V to select the Manual option then
6 6
press ENTER.
Tuning Band
EZ Channel Scan
Ch. Add/Del
Clock Set

TV Aspect

Display Mode

Progressive Scan

PBC
Factory Set
Enter the necessary information for date and
7 7
time.
b / B (left/right): Moves the cursor to the previous
or next column.
v / V (up/down): Changes the setting at the current
cursor position.
Press ENTER to confirm your setting, then
8 8
press SETUP to exit the Setup menu.
TV Aspect
You can choose:
- 4:3: Select if a standard 4:3 TV is connected.
- 16:9: Select if a 16:9 wide TV is connected.
Tuning Band
EZ Channel Scan
Ch. Add/Del
Clock Set
TV Aspect
Display Mode
Progressive Scan
PBC
Factory Set
22
Auto
Manual
Date - - / - -
Year - - - -
Time - - : - - AM
4:3
16:9
Display Mode
Display Mode setting works only when the TV Aspect
ratio is set to "4:3".
You can choose:
- Letter Box: Displays a wide picture with bands on the
upper and lower portions of the screen.
- Pan Scan: Automatically displays the wide picture on
the entire screen and cuts off the portions
that do not fit.
Tuning Band
EZ Channel Scan
Ch. Add/Del
Clock Set
TV Aspect
Display Mode
Progressive Scan
PBC
Factory Set
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
• If you are using the COMPONENT VIDEO OUT
jacks, but are connecting the DVD Recorder to a
standard (analog) television, set Progressive Scan to
OFF.
• If you are using the COMPONENT VIDEO OUT jacks
for connection to a TV or monitor that is compatible
with a progressive scan signal, set Progressive Scan
to ON.
Tuning Band
EZ Channel Scan
Ch. Add/Del
Clock Set
TV Aspect
Display Mode
Progressive Scan
PBC
Factory Set
Caution
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to ON in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray. See that "NO DISC" is displayed on the display
window.
2) Press STOP and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting and a picture will once again be
visible on a conventional analog TV or monitor.
Letter Box
Pan Scan
OFF
ON