Camera Angle Dvd; Marker Search; Audio Channel Selection - LG LH-R5500SB Owner's Manual

DVD and Video CD Operation (Continued)
General Features (Continued)

Marker Search

You can start playback from a memorized point. Up to
nine points can be memorized.
To enter a mark, follow these steps.
1. During disc playback, press MARKER when
playback reaches the spot that you want to
memorize.
The Marker icon will appear on the TV screen briefly.
2. Repeat step 1 to enter up to nine Marker points on a
disc.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH.
The Marker Search menu will appear on the TV
screen.
2. Within 10 seconds, use b / B to select the marker
number that you want to recall or clear.
3. Press ENTER and playback starts from the marked
scene. Or, Press CLEAR and the marker number is
erased from the list.
4. You can play any marker by inputting its number on
the marker search menu.
Reviewing the Contents of DVD Video
Discs: Menus
DVDs may contain menus that allow you to access
special features. To open the disc menu, press
MENU/LIST. Then, press the appropriate number button
to select an option. Or, use the b B v V buttons to
highlight your selection, then press ENTER.
Title Menu
DVD
1. Press TITLE.
If the current title has a menu, the menu will appear
on the TV screen. Otherwise, the disc menu may
appear.
2. The menu may contain camera angles, spoken lan-
guage and subtitle options, and chapters for the title.
Disc Menu
DVD
1. Press MENU/LIST.
The disc menu is displayed.
2. To remove the disc menu, press MENU/LIST again.
Camera Angle
DVD
If the disc contains sequences recorded from different
camera angles, the angle icon appears briefly on the TV
screen. You can then change the camera angle if you
wish.
1. Press DISPLAY during playback. The On-Screen
Display appears on the TV screen.
2. Use v / V to select the Angle icon in the On-Screen
Display.
3. Use b / B to select the desired angle.
The number of the current angle appears on the TV
screen.
Changing the Audio Soundtrack
Press AUDIO then press b / B repeatedly during play-
back to hear a different audio language (DVD only) or
audio soundtrack if available.

Audio Channel Selection

Video VR +RW
Press AUDIO then press b / B repeatedly during play-
back to hear a different audio channel (STEREO, LEFT
or RIGHT).
With DVD-RW discs recorded in VR mode that have
both a main and a Bilingual audio channel, you can
switch among Main (L), Sub (R), Main+sub (L+R), or
Mono by pressing AUDIO.
Note :
The Audio Channel Selection will operate when the
Dolby Digital is set to PCM mode in the Setup menu
(refer to "Audio" on page 28).
DVD
+R VCD
37