General Explanation Of On-Screen Display; Displaying Information On-Screen; Displaying Osd While Watching Tv; Changing Tv Channels - LG LHY-518 Owner's Manual

Before Operation (Continued)
General Explanation of
On-Screen Display
This manual gives basic instructions for operating the
Recorder Combi Receiver. Some DVDs require specific
operation or allow only limited operation during play-
back. When this occurs, the symbol
TV screen, indicating that the operation is not permitted
by the Recorder Combi Receiver or is not available on
the disc.

Displaying Information on-screen

You can display various information about the disc or
tape loaded on-screen.
On-screen display operation
1 1
Press DISPLAY repeatedly to display/change the
information displayed on-screen.
2 2
To remove the on-screen display, press DIS-
PLAY or RETURN (O) repeatedly until it disap-
pears.
See the descriptions on pages 36 and 37 for
detailed explanations of on-screen displays for each
media type.
otes
Some discs may not provide all the features shown in
the on-screen display examples.
The on-screen display disappears automatically if no
button is pressed for seven seconds.
Temporary Feedback Icons
Resume play from this point
Action prohibited or not available

Displaying OSD While Watching TV

While watching TV, press DISPLAY to display/
remove the on-screen display.
For example, when a DVD-RW in VR mode is inserted, you
would see a screen similar to the fol-
Indicates disc type.
Indicates the Recording mode,
free space, and elapsed time
progress bar.
DVD-VR
VR Mode SP 1H 32M Free
Indicates output audio signal.
Indicates current date and time.
appears on the
Indicates channel
low-
number and
ing:
audio input
signal received
by the tuner.
DVD
Ch. 6
MONO
Mono 03/08/2005 11:35AM

Changing TV Channels

If no disc is playing, you can change TV channels using
the number or TRK/PRESET (+/-) (v / V) buttons on the
Remote Control.
ote
Antenna channels are numbered 2 through 69. Cable
channels are numbered 1 through 125.

Changing TV Audio Channel

Some TV programs are broadcast with both a main and
a Secondary Audio Program (SAP). You can change the
TV audio using the AUDIO button.
Press AUDIO repeatedly to change the TV audio,
according to Broadcast audio signal as shown
below.
• STEREO+SAP Audio Signal
Stereo → SAP → Mono → Stereo
• STEREO Audio Signal
Stereo → L → R → Mono → Stereo
• SAP Audio Signal
Mono → SAP → Mono
• MONO Audio Signal
Mono
The current audio channel is displayed on-screen.
• If SAP is selected, but there is no SAP channel being
broadcast, you will still hear the main audio (Mono or
Stereo) channel.
• If the sound is poor quality when set to Stereo, you
can often improve it by changing to Mono.
• When an external input is selected, the audio channel
can be switched only to Stereo.
35