Audio; Dolby Digital; Dts; Mpeg - LG LGDVDR313 Owner's Manual

Pre-operation Setup (Continued)

Audio

Each DVD disc has a variety of audio output options.
Set the Recorder's Audio Output according to the type
of audio system you use.

Dolby Digital

PCM: Select if connected to a 2-channel digital stereo
amplifier. The DVD Recorder's digital audio outputs
sound in the PCM 2ch format if you play a DVD video
disc recorded on the Dolby Digital recording system.
Bitstream: Select "Bitstream" if you connected the DVD
Recorder's DIGITAL OUT jack to a Dolby Digital
decoder (or an Amplifier or other equipment with a
Dolby Digital decoder).
Dolby Digital

DTS

MPEG

Sampling Freq.
DRC

Vocal

DTS
OFF: If you select "OFF", the DTS signal is not output
through the DIGITAL OUT jack.
Bitstream: Select "Bitstream" if you connected the DVD
Recorder's DIGITAL OUT jack to a DTS decoder (or an
Amplifier or other equipment with a DTS decoder).
Setup
Dolby Digital
DTS
Language
MPEG
Sampling Freq.
Audio
DRC
Lock
Vocal
Recording
Disc
MPEG
PCM: Select if connected to a 2-channel digital stereo
amplifier. The DVD Recorder's digital audio outputs
sound in the PCM 2ch format if you play a DVD video
disc recorded on the MPEG2 recording
system.
Bitstream: Select "Bitstream" if you connected the DVD
Recorder's DIGITAL OUT jack to an MPEG decoder (or
an Amplifier or other equipment with a MPEG decoder).
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal
24
PCM
Bitstream
OFF
Bitstream
PCM
Bitstream

Sampling Frequency

If your Receiver or Amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. If this choice is made,
this unit will automatically convert any 96 kHz signals to
48 kHz so your system can decode them.
If your Receiver or Amplifier is capable of handling
96 kHz signals, select 96 kHz. If this choice is made,
this unit will pass each type of signal through without
any further processing.
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal

DRC (Dynamic Range Control)

With the DVD format, you can hear a program's sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to ON for this effect.
Setup
Dolby Digital
DTS
Language
MPEG
Sampling Freq.
Audio
DRC
Lock
Vocal
Recording
Disc
Vocal
Set Vocal to ON only if a multi-channel karaoke DVD is
playing. The karaoke channels on the disc will mix into
normal stereo sound.
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal
48KHz
96KHz
OFF
ON
OFF
ON