Table of contents 1. Introduction 2. Cautions 3. Unpacking & Inspection 4. Setup 5. Operation 5.1. Control Module Operation 5. Technical specifications 6. Performance Notes 7. Configuration the pump power for local AC power 8. Maintenance and cleaning...
1. Introduction Thank you for choosing an ROBE Faze 1000 FT. You now own a rugged and powerful state-of-the-art machine. Prior to use, we suggest that you carefully read all of the instructions. By following the suggestions found in this user manual, you can look forward to the reliable and satisfactory performance of your ROBE Faze 1000 FT machine for years to come.
Other liquids may cause spitting and serious clogging problem and could result in the production of an unhe- althful fog. The use of other liquids voids the warranty of the Faze 1000 FT. When filled, place cap back on liquid tank.
DMX Fog Control: 10 meter wired multi-function remote control module with 5-pin XLR connector for ROBE Faze 1000 FT. Its interface allows the operator to customize fog machine functions by adjusting fogging du- ration, interval and volume. Its LCD displays current operating parameters, which are automatically stored in non-volatile memory, allowing the machine to be powered down without losing function settings.
Fog machine Faze 1000 FT uses 2 channels to control both fan and fog volume. Whatever channel you se- lect on the unit, the channel next to it will be selected automatically for fog volume control. Each channel has a value range of 0 to 225. Timer functions such as duration and interval can be programmed using the DMX controller or the DMX control software being used by lighting and effects operator.
Note: The warranty does not extend to any parts of the Faze 1000 FT that have been subject to misuse or accident. Neither does the warranty cover any Faze 1000 FT that has been opened, modified or repaired other than by ROBE or its designated distributor.
Need help?
Do you have a question about the Faze 1000 FT and is the answer not in the manual?
Questions and answers