Advertisement

Quick Links

Robe X1 FT PRO
USER MANUAL
Version: 1.1
ROBE Lighting s.r.o.
Czech Republic
www.robe.cz

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the X1 FT PRO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Robe X1 FT PRO

  • Page 1 Robe X1 FT PRO USER MANUAL Version: 1.1 ROBE Lighting s.r.o. Czech Republic www.robe.cz...
  • Page 3: Table Of Contents

    Robe X1 FT PRO Table of contents 1. Introduction..........................4 2. Safety information........................4 3. Unpacking and Inspection......................4 4. Product overview........................5 5. Setting Up........................... 5 6. Operation............................ 5 7. Service and maintenance......................7 8. Technical specifications......................8...
  • Page 4: Introduction

    Prior to use, we suggest that you carefully read all of the instructions. By following the suggestions found in this user manual, you can look forward to the reliable and satisfactory performance of your ROBE X1 FT PRO machine for years to come.
  • Page 5: Product Overview

    Step 1: Place the machine on a flat surface and in a suitable large area with at least 50 cm open space around the machine. Step 2: Fill the fluid tank with Robe approved fluid. Step 3: Connect the machine to suitable rated power supply.To determine the power requirement for the machine refer to the label on the back of the machine.
  • Page 6 Control menu Operation Mode XXXX Select Fog or Faze Mode Timer Interval XXX Sec Set interval time at Timer mode from 1 to 300 seconds Timer Duration XXX Sec Set duration from 1 to 120 seconds Timer Output XXX % Set output volume at Timer mode from 20 to 100 % Volume Output XXX %...
  • Page 7: Service And Maintenance

    Do not allow the machine and fluid to become contaminated. Regularly fill distilled water to fluid tank and run the machine to clean the system. After cleaning, refill Robe fog fluids into fluid tank and make sure machine can produce fog properly.
  • Page 8: Technical Specifications

    Maximum Fluid consumption: Fog Mode: 10 ml per minute Faze Mode: 28ml per minute Recommended Fluid: Robe water-based fog fluid for the best effect Control options: LCD Menu, DMX 512, Wireless DMX* Adjustable output volume and fan speed DMX channels:...

Table of Contents