Robe HAZE 500 FT PRO User Manual
  1. Manuals
  2. Brands
  3. Robe Manuals
  4. Fog Machine
  5. HAZE 500 FT PRO
  6. User manual

Robe HAZE 500 FT PRO User Manual

Ft series
Hide thumbs
Table of Contents

Advertisement

Quick Links

HAZE 500 FT PRO
USER MANUAL
Version: 1.3
ROBE Lighting s.r.o.
Czech Republic
www.robe.cz

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HAZE 500 FT PRO and is the answer not in the manual?

Questions and answers

Related Manuals for Robe HAZE 500 FT PRO

Summary of Contents for Robe HAZE 500 FT PRO

  • Page 1 HAZE 500 FT PRO USER MANUAL Version: 1.3 ROBE Lighting s.r.o. Czech Republic www.robe.cz...
  • Page 3 HAZE 500 FT PRO Table of contents 1. Introduction 2. Cautions 3. Unpacking & Inspection 4. Operation and filling Haze liquid 5. Control panel operation 6. DMX control operation 7. Hazer Liquid 8. Technical specifications...
  • Page 4 If your Haze 500 FT Pro fails to work properly, stop using immediately. Drain all hazer liquid from the tank, pack the unit securely ( preferably in the original packing material) , and return it to your ROBE distributor for service.
  • Page 5 Open the shipping carton and verify that all equipment necessary to operate the system has arrived intact. Before beginning initial setup of your ROBE HAZE 500 FT PRO, make sure that there is no evident damage caused by transportation. In the event that the unit's housing or cable is damaged, do not plug it in and do not attempt to use it after having contacted your ROBE dealer for assistance..

  • Page 6: Control Panel Operation

    UME and MANUAL. You can program the necessary menu settings with the control panel when the display indicates »Ready To Haze«. After switching on, the display shortly indicates » ROBE HAZE 500 FT PRO « and is ready for haze output. The display indicates »Ready To Haze«.
  • Page 7 5.Direct haze Press the button FUNCTION until the display indicates »Direct Haze«. Press the button MANUAL to activate the direct haze mode. Then the machine directly starts producing haze after switching on the power. The dis- play indicates »Direct Haze« and starts flashing. To stop the haze output, shortly press the button MANUAL again.

  • Page 8: Technical Specifications

    ROBE HAZE 500 FT PRO has on-board DMX control and the addressing is via the LCD control panel. The HAZE 500 FT PRO uses 1 channel to control on/off operation. The channel has a value range from 0 to 255.

Table of Contents