Quick Setup 1; Getting Started; Batteries; Basic Operation - JVC AV-36P902 User Manual

AV-36P902 English 9/13/01

Getting Started

These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away. This information includes basic instructions
on operating your remote control, making a simple cable/antenna and optional VCR connection
and, finally, information on programming your television's Auto Tuner.
If you have questions, or for more detailed information on any of these steps, please consult
other sections of this manual.
Step One - The Remote Control
The remote control is the key to operating your television's many great features. Before you
can operate your remote control, you first need to install the batteries (included).
Slide the cover on the back of the remote down towards the bottom of the remote control.
Insert two batteries (included) carefully noting the "+"and "–" markings, placing the "–"end in
the unit first. Slide the cover back into place.

Basic Operation

Turn the television on and off by pressing the P
remote.
Power Button
The four key feature buttons at the center of the remote can be used for basic operation of the
television. The top and bottom buttons will scan forward and back through the available chan-
nels. The right and left buttons will turn the volume up or down. These buttons are also
marked with four arrows and are also used with JVC's onscreen menu system. You will need to
use these buttons later in the Quick Setup.
The next step is to connect your television to an antenna or cable.
8
3:55 PM Page 8

Quick Setup 1

button at the top right corner of the
OWER
Key Feature Buttons
Proceed to Step Two