Setting Cable Box Or Satellite Codes - JVC AV-36P902 User Manual

AV-36P902 English 9/13/01
Setting the CATV, VCR and DVD Codes
You can program your remote to operate your cable box, satellite receiver, VCR or DVD
player by using the instructions and codes listed below. If the equipment does not respond
to any of the codes listed below or to the code search function, use the remote control sup-
plied by the manufacturer.

Setting Cable Box or Satellite Codes

The remote control is prog rammed with CATV and/or Satellite codes for power on, power off,
channel up, channel down, and 10 key operation.
1) Find the CATV/Satellite brand from the list of codes shown below.
2) Slide the 2-way selector switch to "CATV".
3) Press and hold down the D
4) With the D
ISPLAY
5) Release the D
ISPLAY
6) Confirm the operation of the Cable Box/Satellite receiver.
• If your CATVor Satellite box does not respond to the first code, try the others listed. If it
does not respond to any code, try the Search Codes Function, on page 54.
3:55 PM Page 19
button.
ISPLAY
button held down, enter the first code number listed using the 10 key pad.
button.
Getting Started
19