Fitting The Furniture Door - CDA ci325 Manual For Installation, Use And Maintenance

Fitting the Furniture
Door
The machine is supplied with a fitting
template that aligns with the top of the
fascia door and has arrows cut out of it
that point toward the door top.
NOTE: If this template is aligned with
the top of the décor door, the resultant
position will align the décor door top
with the top of the machine fascia.
The required height of the door top
edge above the fascia panel, and
hence the gap between décor door and
worktop, can only be determined by the
fitter after the final height adjustment
of the machine has been determined.
The final positioning of the template is
therefore at the discretion of the fitter.
The furniture door should be fitted to
the casing of the washing machine
using the hinges supplied.
Fix the magnetic catch assembly to the
front of the washing machine and to the
furniture door.
30
ARROWS
POINT TO TOP
OF DOOR
TEMPLATE
DOOR
HINGE
POSITIONS
fig. 10
fig. 11