Log Placement - Kingsman VFI25N Installation Instructions Manual

LOGC5 OR LOGF5 PLACEMENT GUIDELINES
C5 or F5 Parts
Step 1: Break ember wool into thumbnail
size pieces. Place glowing embers evenly
on to the front burner tube as shown.
Step 3: Place Log #3 onto the notched
areas as shown. Place Log #4 onto the
notched areas as shown. (Refer to step 2
for notched area locations).
Burner
Step 2: Place Log #1 on burner as shown
and pull forward to the grate bars. Place
log #2 on rear log holder and center it.
Step 4: Place lava rock around the sides
and the front of the burner as shown.
Sprinkle vermiculite over top of the lava
rock as shown. (Do not place lava rock or
vermiculite on the burner tube areas).
9