Before Calling Service Personnel - Audiovox AVP-7180 Operating Instructions Manual

BEFORE CALLING SERVICE PERSONNEL

Before calling service personnel, check the following points for a possible cause of the trouble. A minor adjustment
on your part may eliminate the trouble.
SYMPTOMS
There is no power to the VCP.
No picture on screen when
playing back a recorded tape.
Noise bars on screen.
Operation key does not work
Cassette is ejected upon
insertion.
Audio output does not change to
Hi-Fi mode.
CAUSE
♦ The power cord is not
connected.
♦ The polarity of power cord is not
correct.
♦ The TV is not set to the video
channel, 3 or 4.
♦ Tracking is not adjusted.
♦ If the cassette or the VCP is not
in normal condition, every
indicator LED/LAMP lights up
and the VCP does not work.
♦ Safety device works to protect
the cassette when it is inserted
incorrectly.
♦ The cassette is recorded in
mono VCR.
♦ The first auto tracking is
executing now.
22
POSSIBLE SOLUTIONS
♦ Check the power cord.
♦ Change the polarity of power cord.
♦ Set your TV to the video channel, 3
or 4.
♦ Adjust the picture to be clear by
pressing the PLAY key.
♦ Turn off the power and on by
pressing the POWER cord.
♦ Unplug and replug the power cord.
♦ Pull the cassette out (unloading it)
and insert it firmly into the cassette
compartment again.
♦ The cassette can not be played
back in Hi-Fi mode.
♦ Wait for a second.