Before Calling Service Personnel - Audiovox AVP-7000 Operating Instructions Manual

BEFORE CALLING SERVICE PERSONNEL

SYMPTOMS
POWER
NO POWER
PLAYBACK
No picture on screen when
playing back a recorded tape.
Noise bars on screen
OTHERS
Operation keys do not work.
Cassette is ejected upon
inserting
CAUSE
• The power cord is not
connected
• The polarity of power cord is
not connected
• The TV is not set to the video
channel, 3 or 4.
• Tracking is not adjusted.
• If the cassette or the VCP is
not in normal condition, every
indicator LED/LAMP is lit up
and the VCP does not work.
• Safety device works to protect
the cassette when it is
inserted incorrectly.
20
POSSIBLE SOLUTIONS
• Connect the power cord.
• Change the polarity of the
power cord.
• Set your TV to the video
channel, 3 or 4.
• Adjust the picture to be clear
by pressing the PLAY key.
• Turn off the power and turn on
the power again by pressing
the POWER key.
• Unplug and re-plug the power
cord.
• Pull the cassette out
(unloading) and insert it firmly
into the cassette
compartment.