Maintenance - Makita 9046 Instruction Manual

Operation
Turn the tool on and wait until it attains
full speed. Then gently place the tool on
the workpiece surface. Keep the base flush
with the workpiece
a t
all times. Apply
slight pressure only. Excessive pressure
may damage the paper and shorten tool
life.
CAUTION
:
Never run the tool without paper. You may seriously damage the pad.
MAINTENANCE
CAUTION :
Always be sure that the tool is switched off and unplugged before attempting to perform
inspection or maintenance.
To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and
replacement, any other maintenance or ajustement should be performed by Makita
Authorized or Factory Service Centers, always using Makita replacement parts.