Additional Safety Rules - Makita 9046 Instruction Manual

VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle,
outlet, etc.) be sure the voltage supplied is the same as that specified o n the
nameplate of the tool.
A
power source with voltage greater than that specified
for the tool can result in SERIOUS INJURY t o the user
-
as well as damage t o
the tool.
If
in doubt,
DO
NOT PLUG IN THE
TOOL.
Using a power source
with
voltage less than the nameplate rating is harmful t o the motor.
ADDITIONAL SAFETY RULES
1. Hold the tool firmly.
2. Do not leave the tool running. Operate the tool only when hand-held.
3.
This tool has not been waterproofed,
so
do not use water on the workpiece
surface.
SAVE THESE INSTRUCTIONS.
4