Hip Carry Position - Infantino Sync Instruction Manual

3
Carrier use for an Older Baby: Hip Carry Position
* IMPORTANT! Baby must be able to sit up on their own before being worn in
the hip carry position.
1.
Place lumbar belt at your natural waist (where
your belly button is) with the printed labels
facing towards you and the 2 body panels
hanging down in front of you.
2.
Fasten the lumbar belt buckle opposite the hip
on which you want to carry baby. You will hear
a 'click' when secure. Pull webbing to tighten.
3.
Once carrier is properly secured, lift baby up and
place them on your hip. Their legs should wrap
around your waist.
4.
Keeping one hand secure on baby, bring left
body panel up over baby's back and over
your shoulder.
10.
5.
Repeat with the right body panel. Make sure
both body panels are spread over baby's body
including their bottom, back and shoulders.
6.
While holding baby securely, reach behind
your back to grab the shoulder strap from the
opposite side of your body. Bring strap around
the front.
7.
Repeat with the other shoulder strap. This will
create an "X" on your back.
8.
With the shoulder straps in the front of your body
pull forward to tighten.
11.