Carrier Use For An Infant: Facing-In Position; Instructions - Infantino Flip Front2Back Owners Manual Instructions

Table of Contents

Advertisement

Instructions:

1

Carrier use for an Infant: Facing-In Position

* IMPORTANT! Your baby must face toward you until he/she is able to hold their
head upright.
* When using this carrier in the facing-in position, please fit it to the user before
placing the baby in the carrier.
* Keep one hand on the baby until all the buckles and straps are properly fastened.
1.
Unfasten the "chest/back buckle" and "lumbar
belt" buckles. Hold the carrier with the straps
facing towards you. (The straps should form
a "V.")
2.
Place your arms through the "shoulder straps"
making sure that the foam padding rests on
your shoulders.
3.
With the "shoulder straps" in place, reach behind
your back to connect the "chest/back buckle."
If you need assistance, have another person
fasten the buckle. Pull strap to tighten.
4.
4.
Fasten the "lumbar belt" around your waist. Slide
the belt around your waist until the padded area
is centered on your back. Pull strap to tighten.
5.
Attach the "side closure assembly" on the side
you wish to close, first by pressing the
"hook & loop inside the carrier body" to the
"hook & loop on the shoulder strap flap" then
by fastening the "side closure buckle." You will
hear a 'click' when the buckle is secure. This
step will create a leg opening on the closed
side.
6.
With the carrier open on one side and the baby
facing you, carefully slide the baby into the
carrier by fitting his/her leg through the opening
on the closed side of the carrier.
* IMPORTANT! Keep one hand on the baby until all
buckles and straps are properly fastened.
* Make sure your baby's leg goes through the
opening on the closed side of the carrier.
5.

Advertisement

Table of Contents
loading

Table of Contents