Back Carry Position Assisted - Infantino Sync Instruction Manual

4 A.
Tibetan Tie: Back Carry Position Assisted
1.
Repeat steps 1-6 of Carrier use for an Older Baby:

Back Carry Position Assisted.

2. Bring shoulder straps to front, then weave right
shoulder strap through left arm loop. Repeat
with other side making an "X" on your chest
Pull forward and tie in a double knot.
3.
Removing Baby From Carrier: Facing-In & Hip Carry Positions
1.
While keeping one supportive hand on the baby, untie the shoulder
straps.
2.
Remove the top panel from your shoulder and baby's back and let it
drape down in front of you.
3.
For use in the Infant: Infant Hug Hold: Using both hands, carefully slide
baby out of the pocket and place them in a safe and secure location.
4.
Remove remaining panel.
5.
Unbuckle the lumbar belt and remove the carrier.
Removing Baby From Carrier: Back Carry Position (Assisted)
1.
With your partner keeping a supportive hand on the baby, lean forward
slightly and untie the shoulder straps.
2. Remove the top panel from your shoulder and baby's back and let it
drape down in front of you.
3.
Remove remaining panel.
4. Have your partner gently lift baby off your back and place them in a
safe and secure location.
5.
Unbuckle the lumbar belt and remove the carrier.
4.
Once tied, you must spread knit
panels apart for proper support. Be
sure to bring one panel up towards
baby's shoulders.
14.
Designed with
© 2011 Infantino, LLC
4920 Carroll Canyon Road, Suite 200 | San Diego, CA 92121 USA
www.infantino.com
BEFORE USING THIS CARRIER: Review and save the Instruction Manual for future reference. Please call Infantino at
1-800-840-4916 (for US or Canada) with any questions or visit our website www.infantino.com. Made in China.
in California
11152011