Polaris 2000 Universal Snow Owner's Safety And Maintenance Manual page 87

MAINTENANCE
Clutch Center Distance
Measure belt deflection with both
clutches at rest and in their full neutral
position.
Place a straight edge on the belt and
apply downward pressure while mea-
suring at the point shown.
The recommended center distance
for your machine can be found on the
Owner's Manual Specification Sup-
plement.
Due to tolerances in belt length, it may
be necessary for your dealer to make
minor adjustments in the driven clutch
to achieve correct belt tension.
Belt Deflection Adjustment (P-85 System)
Adjustment can be done on P-85 clutches without removing the clutch from the
jackshaft.
1. Pull belt into driven clutch to slightly open sheaves.
2. Loosen the three bolts on the adjustment cam.
3. To reduce distance between sheaves, turn cam counterclockwise. Torque
bolts to 10 ft. lbs. (1.4 kg/m)
NOTE: If your model has a P-90 clutch, any adjustments must be performed by
your dealer.
82
Straight Edge
Measure at
this point
Belt Tension