Polaris 2000 Universal Snow Owner's Safety And Maintenance Manual page 47

OPERATION
Emergency Stopping Procedures
The following chart lists methods for stopping the engine in the event of an emer-
gency.
SYSTEM WHAT IT DOES
Ignition Switch Interrupts ignition circuit
Brake Slows drive shaft
Choke Floods engine
Auxiliary Shut-Off Switch Interrupts ignition circuit
Throttle Safety Switch Interrupts ignition circuit
Tether Switch (Option) Interrupts ignition circuit
Refer to page 40 for more information on the auxiliary shut-off and throttle safety
switches.
Emergency Starting Procedure
Your machine comes with a tool kit containing essential tools for emergency use.
In the event the recoil starter system should fail, take the emergency start strap
from the kit and proceed as follows:
1. Open clutch guard.
2. Push on the inner sheave
of the secondary clutch and
rotate clockwise slightly to
relieve belt tension. This
allows for easier starting.
3. Starting at one of the tower
struts, wind the strap
counterclockwise around
the clutch as shown.
WARNING
Do not wind the strap around your hand. Severe injury could result.
4. Pull the strap using a sharp, crisp pull so the strap comes free of the clutch.
CAUTION:
Keep all people clear of the snowmobile when using the emergency starting proce-
dure.
42
THROTTLE
CONDITION
All
All
1/2 throttle or less
All
All
All