RODE Microphones NT1-A Instruction Manual page 11

• After use the NT1-A should be removed from its
shock mount, wiped with a dry, soft cloth and
placed in the supplied protective sleeve/dust cover.
• Alternatively if the mic is being used regularly,
we strongly suggest you cover the mic with the
supplied protective sleeve/dust cover. This can
simply be slipped over while the mic is still in the
shock mount.
• Be sure to place the moisture-absorbent crystals
(supplied) at the head of the microphone(s), so as
to absorb any moisture present.
Eventually this pack of crystals will need to be
dried. This is indicated by the crystals turning pink
in colour.
They can easily be re-used by placing them in an
oven at 100 - 150 degrees celsius for approximately
ten minutes. The crystals will operate effectively
again once they have turned blue.
- 11 -
Storage