Table of Contents
Advertisement
The Packet Data settings described here allow you to determine if and how the AMC
is allowed to use cellular Packet Data. You can choose to generally disable it for the
AMC (Off ), use it exclusively for HTTP(S) requests (Minimal, i.e. Corporate Contacts
access, HTTPS Callbacks etc.), or allow its usage only in your provider's network (Local
Network ). To use it whenever needed for a system registration (no Voice over 3G) set
this to GPRS Dynamic.
Local Network + Roaming = Minimal
Please note that while in roaming in other provider networks and while the
setting Local Network is active, the actual usage of the cellular data channel
is done according to the setting Minimal, i.e. registrations are not possible
and only HTTP(S) requests are allowed.
Native Settings Dependent
Smartphones have preference options to enable or disable the use of packet
data. If turned off in the native menu, any preferences made within the AMC
remain without effect!
Costs and Battery Life
Please note that the usage of data channels may drain the phone's battery.
If costs run too high, a provider might also disconnect the call. Section
page
14
contains information about the amount of data consumed by certain
features.
Dual-Mode-Network:
GPRS_OFF, GPRS_MINIMAL, GPRS_DYNAMIC,
GPRS_LOCAL_NETWORK
12.7 Call Preference
By setting the Dial Mode you can configure in which situations your AMC shall handle
incoming and outgoing calls.
The rule you choose here will only be applied if the AMC is activated.
Call-Preference: ENTERPRISE_ONLY and DUAL_IDENTITY (default)
amc-4_android_ug_en_2014-03
12 Administrator Settings
5
on
50
Advertisement
Table of Contents
