Back Panel Description - Amped Wireless APA20 User Manual

High power 700mw dual band ac wi-fi access point

Hide thumbs Also See for APA20:

Table of Contents

APA20

USER'S GUIDE

Back Panel Description

Antenna Connectors (1-3): RJ-SMA antenna connectors. Attach the included high gain antennas to

these connectors according to their respective numbers. (Mismatching the antennas with the wrong

antenna connector port will negatively impact wireless performance.)

USB Port: Attach USB storage devices, such as USB flash drives and external hard drives, for file

sharing.

Reset: Push down once to reboot the Access Point. Hold down for 5-10 seconds to reset the Access

Point back to factory settings.

WPS: Hold down for 3 seconds to enable WPS push button configuration.

Wired Devices: Gigabit RJ-45 ports for connecting to wired computers or network devices.

Network: Gigabit RJ-45 port for connecting to an available port on your network.

Power: Power adapter port. Output: 12V 1.5A, Input: 100-240v.

Table of Contents