Amped Wireless APA20 User Manual page 56

APA20
c. Your Access Point may be installed in a poor location. Avoid setting up your Access Point in areas with
high interference, such as near fridges, microwaves, metallic objects and low surfaces. Install the Access
Point in a higher location if possible.
d. Adjust the Antennas of the Access Point in different angles.
My wireless adapter does not connect at the maximum wireless speed.
a. Your wireless network adapter may be outdated and have older wireless technology not capable of
achieving the wireless network speeds of the Access Point. To achieve maximum wireless speeds, it is
required that you have a 802.11n (2.4GHz) or 802.11ac (5.0GHz) adapter.
b. Check that you are using the latest Wi-Fi security type: WPA or WPA2
WEP security may slow down your wireless speeds.
c. Check that the Access Point's wireless data rate is set to AUTO or 11N (2.4GHz) and 11AC (5.0GHz)
data rate speeds.
d. Wireless speeds degrade as you get further away from the Access Point.
e. Check that the wireless channel set on the Access Point is not crowded. Try changing the wireless
channel to another channel and test the speed again.
USER'S GUIDE
55