Removing and replacing a FRU
1120 LCD assembly
For access, remove following FRUs, in order:
v "1010 Battery pack" on page 72
v "1030 Hard disk drive" on page 76
v "1070 MDC-2" on page 81
v "1090 Keyboard" on page 83
v "1100 Upper case" on page 86
Before removing LCD assembly, release the cables as in
step 1 and 2 below. Then, remove the connector 3 .
Step
Screw (quantity)
4
M2 × 8 mm, wafer-head,
nylon-coated (2)
(continued)
90
MT1866/1867/1869
Color
Torque
Silver
0.196 Nm
(2 kgfcm)