Table of Contents
Advertisement
itting blades
F
WARNING:
When fitting blades,
it is extremely important that the
raised section on the retaining wash-
er engages correctly in the centre
hole of the blade. If the blade is fitted
incorrectly, it can result in serious
and/or fatal personal injury.
WARNING:
Never use a cutting
attachment without an approved
guard. See the section on Techni-
cal data. If an incorrect or faulty
guard is fitted this can cause seri-
ous personal injury.
Fitting a blade guard, grass
blade and grass cutter
G
D
B
A
S Hook the blade guard/combination guard
(A) onto the fitting on the shaft and secure
with the bolt.
CAUTION! Use the recommended blade
guard. See the Technical data section.
S Turn the shaft until one of the holes in
the dust cup (B) aligns with the corre-
sponding hole in the gearbox.
S Insert a small screwdriver (C) in the hole
to lock the shaft.
S Place the blade (D) and retaining washer
(E) onto the shaft of the gearbox.
NOTE:
Make sure the raised part of the
retaining washer is facing the gearbox
and the raised area fits into the hole in
the centre of the blade.
115432326 Rev. 4
2/17/12
ASSEMBLY
S Place the cupped washer (F) onto the
shaft with the cupped side of the washer
toward the blade.
S Install the blade retainer nut (G). Tighten
the nut using the wrench (provided).
Turn in the opposite direction to the di-
rection of rotation (CAUTION! left-hand
thread).
Fitting the trimmer guard and
trimmer head
S Hook the trimmer guard/combination
guard (A) onto the fitting on the shaft and
secure with the bolt (D).
F
E
C
A
S Turn the shaft until one of the holes in the
dust cup (B) aligns with the correspond-
ing hole in the gearbox.
S Insert a small screwdriver (C) in the hole
to lock the shaft.
S Screw on the trimmer head (E) in the
opposite direction to the direction of
rotation.
S To dismantle, follow the instructions in
the reverse order.
D
B
A
E
English--- 12
C
Hide quick links:
Advertisement
Table of Contents
