Page 1
JK Audio QuickTap Telephone Handset Tap Users Guide Telephone Interface Products...
Page 2
Unplug the handset cord from your telephone base. Using the black handset jumper cord that we have provided, connect the telephone jack of QuickTap to the handset jack on your telephone base. Plug your handset cord, and handset, into the handset jack on QuickTap.
Page 3
Two adapter cables are supplied with QuickTap. One cable has 1/8" mono connectors on each end. This cable can be used to connect QuickTap to the line input on some powered speakers. The second cord has a 1/8" stereo plug on one end and an RCA mono plug on the other end.
QuickTap will work with any handset design out there. We designed QuickTap to work with most popular telephones. QuickTap is not for use with cellular phones or telephones that have a keypad built into the handset.
Page 5
FCC Registration Your new JK Audio product has been registered with the Federal Communications Commission (FCC). This product complies with the standards in Part 68 of the FCC rules. The FCC requires us to provide the following information: Connection and use with the nationwide...
Page 6
FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper functioning of your JK Audio product. If such changes are planned, you'll be notified.
Page 7
FCC Registration (continued) permission to connect this telephone equipment to their telephone must first be obtained.
Page 8
Warranty The model QuickTap is covered by a 2 year warranty to be free from defective workmanship and materials. In the event that the QuickTap needs repair, you must call us to get an authorization, and then carefully pack and ship it to us.
Need help?
Do you have a question about the QuickTap and is the answer not in the manual?
Questions and answers