Page 1
QuickTap Telephone Handset Tap User Guide JK Audio...
Page 2
2. Using the black handset jumper cord that we have provided, connect the telephone jack of QuickTap to the handset jack on your tele- phone base. 3. Plug your handset cord, and handset, into the handset jack on QuickTap.
Page 3
Two adapter cables are supplied with the QuickTap. One cable has 1/8" mono connec- tors on each end. This cable can be used to connect QuickTap to the line input on some powered speakers. The second cord has a 1/8" stereo plug on one end and an RCA mono plug on the other end.
Page 4
The QuickTap works great for recording conversations but how do I send a re- cording down the telephone line? The QuickTap is a receive only device. If you want to send recorded audio down the line, you should purchase a THAT-1, THAT-2 or a Voice...
Page 5
QuickTap will work with any handset design out there. We designed QuickTap to work with most popular telephones. QuickTap is not for use with cellular phones or telephones that have a keypad built into the handset.
Page 6
FCC Registration Your new JK Audio product has been registered with the Federal Communications Commission (FCC). This product complies with the standards in Part 68 of the FCC rules. The FCC requires us to provide the following information: 1. Connection...
Page 7
FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper functioning of your JK Audio product. If such changes are planned, you will be notified. If this telephone equipment is to be used with a...
Need help?
Do you have a question about the QuickTap and is the answer not in the manual?
Questions and answers