Table of Contents
Advertisement
How to use your gas oven
Figure 10
C
A
B
Lighting of oven burner
The thermostatic tap controlling the gas supply to the burner is equipped with a safety
device which automatically stops the gas flow in case of flame extinction. The tempera-
ture is constantly maintained on the set value.
The electric ignition starts up by pressing the thermostat knob.
A safety device prevents the electric ignition from functioning when the oven
door is shut.
A. Temperature Selector/lgnition
Light the oven with the door open, lightly press and turn the thermostat knob (A)
anti-clockwise to the desired setting. Press the knob right in to operate the electronic
ignition. Hold it in for 10 -15 seconds after the flame has lit.
If the oven fails to light using the electronic ignition it can be lit with a match (fig. 11).
If there is a fault refer to APPLIANCE SERVICING.
Figure 11
11
Advertisement
Table of Contents
