Table of Contents
Advertisement
Installation to L.P .G. (for fitters use only)
This appliance is regulated to work with
natural gas.
If it has to work with another type of
gas (L.P.G.), before the appliance is
connected you must substitute the oven
burner injector as follows:
Open the oven door completely.
Remove the burner cover (Fig. 3).
Remove the burner by unscrewing
the two front screws (Fig. 4).
Unscrew the oven burner injector
(Fig. 5) using a 7mm spanner and
substitute it with one (see table) of
the correct size.
Replace all the components by fol
lowing in reverse the operations
explained above.
Figure 3
Figure 4
Figure 5
7
Advertisement
Table of Contents
